Technical

The EVauto® fleet charging control system is built on the Tridium Niagara platform, using Tridium Niagara 4 software. Specific processors will vary based on the volume of electric vehicle service equipment (EVSE) used onsite. Platform hardware used will vary by fleet size.

To keep your system and data safe and accessible, your EVauto subscription includes user access through our hosted EVauto Fleet Manager software.

The Base System control components are mounted in an Attabox Heartland NEMA 4 rated panel enclosure featuring a lock, din rail, and grommet, and is shipped ready for installation by your electrician.

Components mounted in the Base System include:

  • Niagara

    • Lynxspring Edge Series
    • Tridium Niagara JACE 8000
    • Industrial PC running Niagara 4

  • PepWave Max BR-1 Cellular Modem

Components mounted in the Base System include:

  • Niagara

    • Lynxspring Edge Series
    • Tridium Niagara JACE 8000
    • Industrial PC running Niagara 4

  • PepWave Max BR-1 Cellular Modem

  • Base System power requirements:

    • 120 VAC/10Amp

  • Environmental requirements:

    • Temperature: -4 to 140 F (-20 to 60 C)
    • Humidity: Relative Humidity from 5% to 95%, non-condensing

If your EVSE utilizes the Zigbee protocol, the Base System will include a Digi XBee Industrial Gateway radio which can be ordered in a separate enclosure depending on your facility layout.

  • Base System power requirements:

    • 120 VAC/10Amp

  • Environmental requirements:

    • Temperature: -4 to 140 F (-20 to 60 C)
    • Humidity: Relative Humidity from 5% to 95%, non-condensing

If your EVSE utilizes the Zigbee protocol, the Base System will include a Digi XBee Industrial Gateway radio which can be ordered in a separate enclosure depending on your facility layout.

Scroll to Top